Notes On Installation; Notes On Handling - Epson SureLab D700 Operation Manual

Notes on Installation

Do not block the printer's airflow vents.
Do not cover the printer with a cloth or other materials and do not install in an area with poor ventilation.
Make sure to leave enough space around the printer. See the Start Here sheet for more information.
Do not install or store the printer in a location that is unstable or subject to vibrations from other equipment.
If the printer falls, an injury could occur.
Do not install the printer in smoky or dusty locations, humid locations, or locations where it is likely to get wet.
Electric shock or fire could occur.
When lifting the printer, make sure you use correct lifting posture.
If you do not use correct posture, an injury could occur.
If you place the printer on a stand with casters (wheels), make sure you secure the casters to prevent them from
moving before starting operations.
If the stand moves unexpectedly during operations, an injury could occur.

Notes on Handling

Do not use in locations with volatile substances such as alcohol and thinner, or in locations with fires.
Electric shock or fire could occur.
Do not use the printer if you notice smoke, strange odors, or sounds.
Electric shock or fire could occur.
If an abnormality occurs, turn off the printer immediately, unplug it from the electrical outlet, and contact your
local dealer.
Do not use this printer if foreign materials, water, or other liquids have entered the printer.
Electric shock or fire could occur.
Turn off the printer immediately, unplug it from the electrical outlet, and contact your local dealer.
Except as instructed in the documentation, do not disassemble the printer.
Making repairs yourself is extremely dangerous and must not be attempted.
Introduction
Warning
Caution
Warning
14