Setting Channels; Selecting The Video Signal-Source - Samsung LT-P468W Owner's Instructions Manual

Setting Channels

Selecting the Video Signal-Source

Before your television can begin memorizing the available channels, you must specify the type of signal source
that is connected to the TV (i.e., an antenna or a cable system).
MENU
1
ENTER
2,3,4
.../†
2,3,4
EXIT
5
1
Press the [MENU] button.
The menu will be displayed.
Press the [.../†] buttons to move to <Channel>, then
2
press the [ENTER] button.
The <Channel> menu will be displayed.
Press the [.../†] buttons to move to <Air/CATV>,
3
then press the [ENTER] button.
The signal source menu will be displayed.
4
Press the [.../†] buttons to move to signal source of your
choice, then press the [ENTER] button.
5
Press the [EXIT] button to finish.
STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable
Note
system that exists in your particular area.
At this point the signal source has been selected. Proceed to "Storing
Channels Automatically" (next page).
Channel
√
Air/CATV : Air
√
Auto Program
√
Add/Delete
√
Fine Tune
√
LNA : On
Move Enter Return
Channel
√
Air/CATV : Air
Air
√
Auto Program STD
√
Add/Delete HRC
√
Fine Tune IRC
LNA : On
Move Enter Return
41