Connecting a Camcorder/Gaming Device
This applies to all external input devices connected using the video and audio terminals.
Connect the video cable between the [Video 1In
(yellow)] terminal on the back of the TV or the
1
[Video2 In (yellow)] terminal on the side of the
TV and the [Video Out (yellow)] terminal on the
back of the Camcorder.
Connect the Audio cable between the [Left
2
(white) -Audio- Right (red)] terminals on the side
or back of the TV and [Audio Out (white/red)]
terminals on the back of the Camcorder.
Viewing a Camcorder Recording
SOURCE
1
Rear Panel of LCD TV
Gaming Device
Camcorder
Turn your TV on, then press the [SOURCE] button
1
to select <AV1> or <AV2>.
• If <AV1> or <AV2> is unavailable, please check that the
video cable is connected correctly.
Turn on the Camcorder and press the [PLAY]
2
button.
• Please refer to the Camcorder User's Manual.
• If you have connected the video cable to the [AV1] or [AV2] terminal, press the
[SOURCE] button to select [AV1] or [AV2].
Note
• Set the Gaming Device or other external input devices in the same way listed
above.
• Audio and video cables are sold separately.
Audio
Cable
2
√
3
Supply power to your TV and the Camcorder
after making all the connections.
•
Connect all other external input devices in the same manner as
listed above.
Note
•
Connecting to the [AV2 IN] terminal on the side of the TV will
make it easy to use the camcorder or a gaming device.
Video
Cable
1
œ
AV2
33