Connecting A Digital Set-Top Box (Stb) - Samsung LT-P468W Owner's Instructions Manual

Connecting a Digital Set-Top Box (STB)

1
Connect the antenna cable to the antenna input
terminal on the back of the Set Top Box.
Connect the component cable between the
[Component In1 (Y/Pb/Pr)] or the [Component
2
In2 (Y/Pb/Pr)] terminals on the back of the TV
and the [Component Out] terminals on the back
of the Set Top Box.
Viewing a Digital Broadcasting Program
SOURCE
1
32
Rear Panel of LCD TV
DVI-D Cable
If the STB has a DVI
(sold separately)
OUTPUT, you can connect
using an audio cable and a
DVI-D cable.
Set Top Box
Turn your TV on, then press the [SOURCE] button to
1
select <Component1> or <Component2>.
• If <Component1> or <Component2> is unavailable,
please check that the component cables are connected
correctly.
2
Turn on the STB and select the mode of your choice.
• If you have connected the video cable to the [Component2] terminals instead of
the [Component1] terminals, press the [SOURCE] button to select
Note
<Component2>.
• If you have connected using a DVI-D cable, press the [SOURCE] button to select
<DVI>. In this case connect the audio cable to the [Left-Audio-Right] terminals
below the DVI terminal.
• Component and audio cables are sold separately.
Audio Cable
Component Cable
2
√
Connect the audio cable between the [Left
3
(white) -Audio- Right (red)] terminals on the
back of the TV and the [Audio Out (white/red)]
terminals on the back of the Set Top Box.
4 Supply power to the TV and the Set Top Box
after making all the connections.
If the Y, Pb, or Pr cables are cross wired when connecting the
component cables, the picture will be red or blue.
Caution
Coaxial Cable
3 1
œ œ
Component1