Connecting A Dvd Player - Samsung LT-P468W Owner's Instructions Manual

Connecting a DVD Player

To Connect Using Component Cable
Connect the component cable between the
[Component In1 (Y/Pb/Pr)] or [Component In 2
1
(Y/Pb/Pr)] terminals on the back of the TV and
the [Component Out] terminals on the back of
the DVD player.
Connect the audio cable between the [Left
2 (white) -Audio- Right (red)] terminals on the
back of the TV and [Audio Out (white/red)]
terminals on the DVD player.
Viewing a DVD Title
SOURCE
1
30
Rear Panel of LCD TV
1
DVD
Turn on your TV, then press the [SOURCE] button
1
to select <Component1> or <Component2>.
• If <Component1> or <Component2> is unavailable
please check that the component cables are connected
correctly.
2
Turn on the DVD player and press the [PLAY]
button.
• If you have connected the video cable to the [Component2] terminal instead of
[Component1], press the [SOURCE] button to select <Component2>.
Note
• Component and audio cables are sold separately.
√
Component Cable
3
Supply power to the TV and the DVD player
after making all the connections.
If Y, Pb, or Pr cables are not connected properly, the
picture will be red or blue or not appear at all.
Caution
Depending on the manufacturer, the DVD terminals
may be identified as "Y, PB, PR" or "Y, B-Y, R-Y" or "Y,
Note
CB, CR".
2
œ
Audio Cable
Component1