Connecting A Vcr - Samsung LT-P468W Owner's Instructions Manual

Connecting a VCR

Connect the antenna cable to the ANTENNA IN
1
terminal on the back of the VCR.
• Connect either the indoor/outdoor antenna cable, the
CATV antenna cable or the Satellite antenna cable.
Connect the video cable between the [Video 1
In (yellow)] terminal on the back of the TV or the
2
[Video2 In (yellow)] terminal on the side of the
TV and the [Video Out (yellow)] terminal on the
back of the VCR.
Viewing VCR Playback
SOURCE
1
28
Rear Panel of LCD TV
Video Cable
S-Video
Cable
VCR
Turn your TV on, then press the [SOURCE] button
1
to select <AV1> or <AV2>.
• If <AV1> or <AV2> is unavailable, please check that the
video cable is connected correctly.
Turn on your VCR, then press the [PLAY] button.
2
• If you have connected the TV and the VCR using an S-Video cable, press the
[SOURCE] button to select <S-Video1> or <S-Video2>.
Note
• If you have connected the video cable to the [AV2] terminal, select <AV2>.
• Audio and video cables are sold separately.
Audio Cable
OR
2 3
√ œ
Connect the audio cable between the [Left
3
(white) -Audio- Right (red)] terminals on the side
or back of the TV and the [Audio (white/red)
Out] terminals on the VCR.
4 Supply power to your TV and VCR after making
all the connections.
For a VCR with an S-VIDEO terminal, connect the S-
Video cable between the [S-Video In] on the TV and
Note
the [S-Video Out] terminal on the VCR. For connection
of the audio cable please follow the instructions above.
Coaxial Cable
1
œ
AV1