Connecting Cable Tv - Samsung LT-P468W Owner's Instructions Manual

Connecting VHF and UHF Antennas
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals
before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most
electronics shops).
1
Connect both antenna leads to the combiner.
2 Plug the combiner into the VHF/UHF terminal on the
bottom of the rear panel.

Connecting Cable TV

Cable without a Cable Box
If you want to connect cable, and you do not need to use a cable box:
Plug the incoming cable into the VHF/UHF antenna
terminal on back of the TV.
Connecting to a Cable Box that Descrambles All Channels
1
Find the cable that is connected to the ANTENNA OUT
terminal on your cable box.
2
Connect the other end of this cable to the VHF/UHF
antenna terminal on the back of the TV.
26
You can connect different cable systems to your TV,
including cable without a cable box, and cable with a
cable box that descrambles some or all channels.