Ricoh Pro C7200x Operating Instructions Manual page 17

Xerographic Process – Belt-to-Paper Transfer
P.P
10
P.P
DZH032
Feeding black or metallic media without selecting the correct media from the library will stop the
machine.
This is because the constant voltage control used for separating the media from the ITB causes a ground
fault due to the conductive carbon substance contained in the media.
If "Black" or "Metallic/Pearl" is selected as the paper type in [Advanced Settings] for the custom paper,
the paper transfer separation voltage is automatically to set to zero. Accordingly, this setting does not
need to be adjusted if the paper type setting is specified properly.
15