Operating Procedure - Toyota Prius Owner's Manual

INFORMATION

To allow the pre-support system to acti-
vate accurately, move the vehicle as
slowly as possible (at a speed that will
allow the vehicle to be stopped sud-
denly).

If only one vehicle is parked, the pre-
support system cannot be used.

The function cannot be used if the shift
position is in "P" or "R", or if the vehicle
speed is faster than 15 km/h (9 mph).

In order to identify parking spaces and
detect parked vehicles using the sen-
sors on both sides of the front bumper,
guidance cannot be given if a space is
not detected.

Parking space guidance and searching
continues until the vehicle speed is
faster than 15 km/h (9 mph) or until the
function is turned off by pressing the
pre-support switch.
1. INTELLIGENT PARKING ASSIST

OPERATING PROCEDURE

CAUTION
 When backing up, be sure to check your
surroundings and behind the vehicle for
safety, and back up slowly, depressing
the brake pedal to control vehicle speed.
 If you seem likely to hit nearby vehicles,
obstacles or people, depress the brake
pedal to stop the vehicle, then disable
the system by touching
screen.
As the system only assists with parking
in a set target parking position, there are
times when the system will be unable to
render this assistance, depending on
factors such as road surface or vehicle
condition, or the distance to the set tar-
get parking position.
Use the system with full understanding
of the fact.
If a message is displayed while maneu-
vering, follow the procedures outlined in
"WHAT TO DO WHEN THIS SORT OF
MESSAGE IS DISPLAYED" on page
343.
The illustrations here describe the pro-
cedure for pulling into a parking space
on the right. For pulling into a parking
space on the left, substitute left for right
and vice versa in all steps.
The operating method differs depending
on whether or not the pre-support func-
tion is in use.
PRIUS + (EE) NAVI 47761E
on the
9
333
14.02.07 10:37