Toyota Prius Owner's Manual page 122

3. MEMORY POINTS
9
Touch "OK".
 When registration of an area to avoid is
completed, the "Edit area to avoid" screen
will be displayed.
INFORMATION

If a destination is input in the area to
avoid or the route calculation cannot be
made without running through the area
to avoid, a route passing through the
area to be avoided may be shown.

Up to 10 locations can be registered as
points/areas to avoid.
EDITING AREA TO AVOID
The name, location and/or area size of
a registered area can be edited.
1
Press the "NAV" button, and touch
"Menu" if the map screen is displayed.
2
Touch "Memory point" on the "Menu"
screen.
3
Touch "Area to avoid" on the "Memo-
ry point" screen.
4
Touch "Edit".
122
5
Touch the area to be avoided.
6
Touch the screen button to be edited.
No. Function
To turn the area to avoid function on
or off. When the indicator is illumi-
nated, the area to avoid function is
on.
To edit the name of the area to
avoid. The name can be displayed
on the map. (See page 123.)
To illuminate the indicator, after
which the registered name is dis-
played on the upper part of the map
screen. (See page 123.)
To edit the area location. (See page
123.)
To edit the area size. (See page
124.)
7
Touch "OK".
PRIUS + (EE) NAVI 47761E
14.02.07 10:37