Easy Set Function - Toyota Prius Owner's Manual

INFORMATION

To allow the pre-support system to acti-
vate accurately, move the vehicle as
slowly as possible (at a speed that will
allow the vehicle to be stopped sud-
denly).

If only one vehicle is parked, the pre-
support system cannot be used to park
on the right side of the vehicle.

The function cannot be used if the shift
" " " "
position is in P or R , or if the vehicle
speed is faster than 15 km/h (9 mph).

In order to identify parking spaces and
detect parked vehicles using the sen-
sors on both sides of the front bumper,
guidance cannot be given if a space is
not detected.

Parking space guidance and searching
continues until the vehicle speed is
faster than 15 km/h (9 mph) or until the
function is turned off by pressing the
pre-support switch.
1. INTELLIGENT PARKING ASSIST

EASY SET FUNCTION

The easy set function can be used if the
pre-support function is not in use.
If the parking space has a white outline,
the easy set function can be used to
commence parking without adjusting the
target parking position.
This function has the following features:
1. When the shift position is in "R" and a
white parking space outline has been
detected, the target parking position
can be minutely adjusted.
2. If a white parking space outline has not
been detected under the conditions de-
scribed in 1 above: by turning the steer-
ing wheel toward the desired parking
space, a white parking space outline
can be detected in that direction and
set as the target parking position.
PRIUS + (EE) NAVI 47761E
9
319
14.02.07 10:37