Pre-Support Switch - Toyota Prius Owner's Manual

PRE-SUPPORT SWITCH

Use this switch to turn on/off the pre-
support function and to switch assist
mode between parallel parking assist
mode and perpendicular parking assist
mode.
 Pressing the pre-support switch while
" "
POWER switch is in ON mode and the
vehicle is travelling below 15 km/h (9 mph)
with the shift position in any position other
" " " "
than P or R , will cause the screen to
change in the following order.
Pre-support function OFF
(Navigation screen, etc.)
Parallel parking assist mode
pre-support screen
Perpendicular parking assist
mode pre-support screen
Pre-support function OFF
(Navigation screen, etc.)
 If the pre-support function cannot be used,
two beeps will sound.
1. INTELLIGENT PARKING ASSIST
PRIUS + (EE) NAVI 47761E
14.02.07
9
311
10:37