Setting The Alarm; Viewing Device Information; Device Care - Garmin Approach S2 Quick Start Manual

3 Select
4 Select AM or PM.

Setting the Alarm

1 Hold
2 Select Alarm > Set.
3 Select
4 Select AM or PM.
5 Verify the alarm is set to On.

Viewing Device Information

You can view the software version and unit ID.
1 Hold
2 Select About.
Appendix

Device Care

Avoid extreme shock and harsh treatment,
because it can degrade the life of the product.
Avoid pressing the keys under water.
Do not use a sharp object to clean the device.
Avoid chemical cleaners, solvents, and
insect repellents that can damage plastic
components and finishes.
Thoroughly rinse the device with fresh
water after exposure to chlorine, salt water,
sunscreen, cosmetics, alcohol, or other harsh
chemicals. Prolonged exposure to these
substances can damage the case.
Do not store the device where prolonged
exposure to extreme temperatures can occur,
because it can cause permanent damage.
or to set the hour and minute.
.
or to set the hour and minute.
.
NOTICE
10