Pci Two-Line Wan Ioa - IBM AS/400e User Handbook Manual

I/O Adapter
adapter. When the attached display supports address sharing, a maximum of 112 shared
sessions are supported.
The #9720 is supported for migration only.

#2721/#9721 PCI Two-Line WAN IOA

The #2721/#9721 supports up to two multiple protocol communications ports and is
supported for migration only.
#2722 PCI Twinaxial Workstation IOA
The #2722 is an 8-port twinaxial workstation IOA with a 20-foot attachment cable for
attaching up to 40 5250-type displays and printers. Each port supports seven attached
addresses. This allows up to 56 attached addresses of which only 40 can be active. When
the attached display supports address sharing, a maximum of 120 shared sessions are
supported. The #2722 is specified when additional PCI twinaxial workstations controllers are
required.
#2723/#9723 PCI Ethernet IOA (10 Mbps)
This feature provides a single attachment to one Carrier Sense Multiple Access/Collision
Detect Local Area Network. It consists of an adapter card and internal code that supplies
Ethernet Version 2 and IEEE 802.3 Media Access Control (MAC), plus 802.2 Logical Link
Control (LLC) functions. The Ethernet/IEEE 802.3 IOA is capable of operating in half or full
duplex mode. RJ45 cabling for 10 Mbps must be CAT-3 or CAT-5. If CAT 5 is used, it must meet
or exceed Industry Standard EIA/TIA T568A or T568B.
It has an RJ45 connector and a 15-pin D-shell connector for attachment of customer-supplied
cabling. A vendor AUI Ethernet cable or RJ45 twisted-pair cable must be ordered separately.
If the #2723/#9723 is selected to run on a #2866 Integrated Netfinity Server, one #0221
(Ethernet on Integrated Netfinity Server) is required for each #2723/#9723 this is ordered.
#2724/#9724 PCI 16/4 Mbps Token-Ring IOA
This feature provides a single attachment to either a 16 Mbps or 4 Mbps Token-Ring. The
feature consists of an IOA card, internal code, which supplies IEEE 802.5 Media Access
Control (MAC), and IEEE 802.2 Logical Link Control (LCC) functions. The IOA is capable of
operating in half or full duplex mode.
The #2724/#9724 comes standard with an 8ft/2.44m Token-Ring cable. An alternately or a
separately purchased twisted-pair cable to the RJ45 connection on the IOA may be attached.
The #2724/#9724 provides one LAN attachment for the #6618 Integrated Netfinity Server.
The #6618 is a prerequisite for the #2724/#9724, and it uses one LAN IOA slot in the #6618.
260
AS/400e System Handbook