Main Storage - IBM AS/400e User Handbook Manual

Hide thumbs Also See for AS/400e:

Table of Contents

A feature cross-reference table provided on the AS/400 system can be used to relate the

Processor Feature Code to the Processor and Interactive features visible in the AS/400

configurator. The Processor Feature Code is found by displaying the QPRCFEAT system

value or in the rack configuration. The Processor Feature Code is used when ordering

software license keys. Or refer to the Model 830 Processor/Interactive Feature table on

Processor Group is determined by a combination of the Processor and Interactive Feature.

The following table provides a cross reference.

Main Storage

All main storage on the Model 830 is feature main storage. All main storage DIMMS on the

Model 830 must be added in sets of eight (octals) of the same capacity and technology.

There are a total of 64 DIMM slots available on the Model 830. Of the 64 lists, 32 are "base",

and an additional 32 are available with feature #2881 Main Storage Expansion installed.

The following memory features are available on the Model 830:

• #3000: Migrated 128 MB Main Storage DIMM— Support only

– Available only on upgrades from Models 620/S20/720 to the Model 830

– Only a quantity of two is supported

– Supported in octal(s) with #3062

Interactive Feature

Processor Feature

AS/400e server 830

Processor Group

AS/400e server 830

Show Quick Links

Table of Contents