Hard Rules: Ioa Capabilities - IBM AS/400e User Handbook Manual

Hide thumbs Also See for AS/400e:

Table of Contents

PCI Card Placement Rules

Hard Rules: IOA Capabilities

#2743 PCI 1 Gbps Ethernet IOA

#2744 PCI 100 Mbps Token Ring IOA

#2749 PCI Ultra Magnetic Media Controller

#2763 PCI Raid Disk Unit Controller

#2768 PCI Magnetic Media Controller

#4723 PCI 10Mbps Ethernet IOA

#4745 PCI WAN IOA

#4746 PCI Twinaxial Workstation IOA

#4748/#9748 PCI Raid Disk Unit Controller

#4750/#4751 PCI ISDN IOA

#4761 Integrated Analog Modem

#4801 PCI Cryptographic Coprocessor

#4815/#4816/#4818 PCI 155Mbps ATM IOA

#4838 PCI 100/10Mbps Ethernet IOA

#9767 PCI Disk Unit Controller (CCIN 2767)

#9771 Base PCI Two-Line WAN with Modem

1. The #2743 PCI 1 Gbps Ethernet IOA must be placed in a 64-bit slot except on the Model

270 system unit where it is supported in a 32-bit slot. The #2743 may only be combined

with a maximum of one other IOA on an IOP. IPX protocol is not supported on the #2743.

There may be only one #2743 per Multi-Adapter Bridge.

2. A maximum of two of these IOAs (#2744 or #4838) is allowed per IOP. Not more than one

#2744 or #4838 is allowed per IOP when this IOP also drives any ATM IOA (#4815,

#4816, or #4818).

3. A maximum of one of these IOAs (#4815, #4816, #4818) is allowed per IOP.

4. A maximum of three of these IOAs (#4748, #9748, #2763) is allowed per IOP.

5. #4801 is not allowed to be controlled by the embedded IOP on the Model 270 and 820 or

the Base IOP on Model 830, 840, SB2, and SB3.

AS/400e System Handbook

4, 10, 12, 14

4, 10, 11, 14

Show Quick Links

Table of Contents