Integrated Fax Adapter - IBM AS/400e User Handbook Manual

• LPDA-1 (Link Problem Determination Aids). This is a diagnostic function supported by
some (primarily older IBM) modems.
• V.54 local and remote loopback (diagnostics functions supported by some modems)
The #2629 LAN/WAN/Workstation IOP is a prerequisite for the #2699. The #2699 takes up
one of the three slots on the #2629.
The #9699 is supported for migration only.

#2664 Integrated Fax Adapter

This feature provides the AS/400 system with two ports capable of transmission and receipt
of facsimile data to or from a Group 3 capable fax machine, another AS/400 system with an
Integrated Fax Adapter, or PCs with appropriately programmed fax adapters. The #2664
consists of a card, a wrap cable (one per machine), two country-unique attachment couplers,
telephone cables, and Licensed Internal Code.
The #2664 can simultaneously support two send or two receive, or one send and one receive
operation. Any output that can be printed on an AS/400 Intelligent Printer Datastream (IPDS)
printer can be faxed using the #2664.
The #2664 supports facsimile protocols defined in CCITT Blue Book Volume VII, Facsimile
VII.3 Recommendations T.4 and T.30 . This adapter requires one I/O feature card slot and the
Facsimile Support/400 licensed program.
The #2664 is supported for migration only.
#6149 16/4 Mbps Token-Ring IOA
This feature provides a single attachment to either a 16 Mbps or a 4 Mbps IBM Token-Ring
Network. The feature consists of an adapter card, internal code (supplies IEEE 802.5 Media
Access Control (MAC) and IEEE 802.2 Logical Link Control (LLC) functions), and an
8 ft/2.44m Token-Ring cable. The 16/4 Mbps Token-Ring IOA is capable of operating in half or
full duplex mode.
The #6149/#9249 comes standard with an 2.44 meter Token-Ring cable. Alternatively, the
customer can attach a separately purchased twisted pair cable to the RJ45 connection on the
IOA.
The #2629 LAN/WAN/Workstation IOP or #9754 MFIOP is a prerequisite for the #6149. It
uses one IOA slot and no I/O card slots.
#6180/#9280 Twinaxial Workstation IOA
The #6180/#9280 is an 8-port twinaxial workstation IOA with a 20-foot attachment cable for
attaching up to 40 5250-type displays and printers. Each port supports seven attached
I/O Adapter
269
I/O Adapter