Bowflex TreadClimber TC200 Assembly & Owners Manual page 58

Troubleshooting
Speed displayed is not accurate
Heart rate not displayed while
using chest strap
Walking belt misalignment
Speed dependent grinding or
scraping noise
Knocking noises when unit is
operating
or scraping noise from under
Things to Check
Outlet
Power cord not plugged in
Power switch turned off
Safety key not plugged in
If problem persists
Display set to wrong unit of
contact with skin
Electromagnetic interference
Chest strap transmitter
If problem persists
IGUS bushing
Shock bolts
Assembly / Owner's Manual
Switch will light up red to indicate power is present.
Contact Customer Service.
Moisten skin contact area on the chest strap.
machine at a gym. If transmitter has good skin contact and still is not found
If chest strap is known to work with other devices and no sources of interfer
treadles.
Contact Customer Care for further assistance.
Contact Customer Care for further assistance.
Check and tighten both upper and lower bolts that connect the shocks to the
unit.
procedure.
58
Solution