FX2N-64DP-M Profibus-DP Master Block
4.2
Displayed Station Address
The station address set by parameter is displayed by the STATION LEDs when 64DP-M is in
ONLINE 1 mode. The station address is displayed by the STATION LED (B0-B6) in binary. The
parameter is set by configuration software (ProfiMap). For the ProfiMap configuration software,
please see the MELSEC ProfiMap Configuration System for Open Networks Software Manual.
Example
When station address is 10, display is as follows.
Figure 4.2: Example Displayed Station Address
64
32
16
8
4
2
1
TEST
B6
B5
B4
B3
ST NO
B2
: LED is not lit.
B1
B0
: LED is lit.
Mode and Displayed Station Address 4
4-3