FX2N-64DP-M Profibus-DP Master Block
8) RSP ERR LED check
Table 5.8: RSP ERR Check
State
Lit
Unlit
9) FAULT LED check
Table 5.9: FAULT LED Check
State
Lit
Unlit
64DP-M is fault when exchange data to slave. Check diagnostic information. For
diagnostic information, refer to section 4.12.
64DP-M is normal operation.
1) When exchange start request flag (BFM #2 bit 0) is turned OFF to ON, check
parameter about following points.
•
There is no active slave on the network.
•
There is slave station of same as master station address.
2) In other case, please contact a service representative.
64DP-M is normal operation.
Description
Description
Diagnostics 5
5-5