Error Messages - Bernina 435 Instruction Manual

Attachment

11.3 Error messages

Message on the display
Too less free capacity on the
BERNINA USB stick (optional
accessory).
No personal data on the
BERNINA USB stick (optional
accessory).
The recovery of personal data has
failed.
114
Cause
Stitch number unknown.
Selection of the stitch pattern not
possible in the combi mode.
The feed dog is not lowered.
The selected needle and stitch
plate cannot be used in
combination.
The needle is not at its top end.
The main motor isn't running.
Not enough free capacity on the
BERNINA USB stick (optional
accessory).
No personal data for recovery
available on the BERNINA USB
stick (optional accessory).
The software update has been
successful but the personal data
couldn't be recovered.
Repair
> Check the entry and enter the new number.
> Combine other stitches.
> Push the button «Feed dog up/down» to lower the feed
dog.
> Replace the needle.
> Replace the stitch plate.
> Adjust the needle position via the handwheel.
> Turn the handwheel clockwise until the needle is at its
top position.
> Remove the stitch plate.
> Remove the thread remnants.
> Clean the hook.
> Remove the hook and make sure that there are no
pieces of broken neelde points on the magnetic back of
the hook.
> Make sure that the BERNINA USB stick (optional
accessory) is used.
> Delete data from the BERNINA USB stick (optional
accessory).
> Make sure that the data and settings have been saved
on the BERNINA USB stick (optional accessory).
> Make sure that the data and settings have been saved
on the BERNINA USB stick (optional accessory).
> Transfer saved data to the machine.