Bernina 435 Instruction Manual page 11

Important safety instructions
•
•
•
•
•
•
•
•
•
12
Do not operate the machine where aerosol products (sprays) or
oxygen are being used.
Keep fingers away from all moving parts. Special care is required
around the needle.
Neither pull nor push the fabric while sewing. This can cause
needle breakage.
When making any adjustments in the needle area - such as
threading the needle, changing the needle, threading the hook or
changing the presser foot - turn the power switch to «0».
Do not use bent needles.
Always use the original BERNINA stitch plate. The wrong stitch
plate can cause needle breakage.
To disconnect, turn power switch to «0» and then remove the
plug from the outlet. Do not unplug by pulling the cord, instead
grasp the plug to pull it from the outlet.
Always disconnect the power plug from the electrical outlet when
the covers are removed or opened, when the machine is
lubricated or during any other maintenance adjustments
mentioned in the instruction manual.
This machine is provided with double insulation. Use only
identical replacement parts. See instructions for Servicing of
double-insulated products.