Making Use Of The Height Compensation Tool; Using The Compensation Plate - Bernina 435 Instruction Manual

Buttonholes

9.2 Making use of the height compensation tool

When a buttonhole is to be sewn at right angles to the project edge, it is recommend to use the height
compensation plates (optional accessory).
> Place the plates from the back between the sewing project and the bottom of the slide to the thick part
> Lower the presser foot.

9.3 Using the compensation plate

When sewing a buttonhole in difficult materials, it is recommended to use the compensation plate for
buttonholes (optional accessory). It can be used along with the Buttonhole foot No. 3A.
> Insert the compensation plate carefully from the side.
94
Buttonhole Buttonhole
number
62
of the sewing project.
Name Description
Straight-stitch eyelet Openings for cords and narrow ribbons,
for decorative work.