Sewing The Manual 5-Step Buttonhole With The Buttonhole Foot No. 3 - Bernina 435 Instruction Manual

Buttonholes
> Touch the icon «Buttonholes».
> Select the Buttonhole No. 51.
> Touch the icon «i»-Dialog.
> Touch the icon «Adjust the length manually».
man
> Sew the desired buttonhole length.
> Stop the machine at desired length of the buttonhole or at the end of the length marking.
> Touch the icon «Scroll down» so that step 3 appears.
> Stop the machine at the height of the first stitch where the buttonhole starts.
> Touch the icon «Scroll down» so that step 4 appears.
> Touch the icon «Scroll down» so that step 5 appears.
> Stop the machine at the height of the last stitch of the first bead.
> Touch the icon «Scroll down» so that step 6 appears.
> Touch the icon «Scrollen unten» so that step 7 appears.
9.10 Sewing the manual 5-step buttonhole with the Buttonhole foot
No. 3
The length of the buttonhole is determined manually while sewing. Bartack, eye and securing stitches are
preprogrammed. The individual steps can also be selected by scrolling using the arrow icons or by touching
the button «Quick Reverse».
Prerequisite:
•
> Touch the icon «Buttonholes».
> Select the Buttonhole No. 54.
100
– Step 1 in the display is activated for the buttonhole start.
– As soon as sewing is started, step 2 is activated.
– The machine sews straight stitches in reverse.
– The machine sews the upper bartack and stops automatically.
– The machine sews the second bead.
– The machine sews the lower bartack and stops automatically.
– The machine secures and stops automatically.
The Buttonhole foot No. 3 is attached.