Fujitsu TeamPad PBT7500-16 Operation Manual page 7

Observe the following to avoid an electrical shock or fire:
Do not damage the power cord of any of the chargers in use (e.g., the
charger of the main equipment).
Electrical
shock
Do not use an outlet with a loose insertion port.
Do not connect or disconnect the charger when your hands are wet.
Do not connect an excess number of power cords to a single outlet.
Use only the designated chargers and expansion stations. Otherwise, an
unapproved rating of voltage or current may damage the device.
Do not disassemble or alter the device. Doing so may cause a device
Prohibited
failure, electrical shock, fire, or other defects.
To avoid a device failure, do not leave the device in the following
places for even a short period of time:
1. A place where the temperature may sharply rise (e.g., in a car with
the windows closed on a sunny day)
2. A place where the device may be exposed to direct sunlight
3. A place where the temperature is too hot or cold
4. A dusty or dirty place
5. A place where the device may vibrate
6. A wet or humid place
Do not insert anything metallic or flammable into the openings of the
device (e.g., slots). Doing so may cause a device failure, electrical
shock, fire, or other such defects.
Always keep the power supply of the charger and the insertion port of
the outlet clean. If they are dusty, clean with a dry cloth.
Failure to keep the charger and the outlet clean may cause a fire.
Do not use the device when electrical storms (especially storms
accompanied by thunder and lightning) occur in the vicinity. In such a
case, turn off the power to the device immediately and disconnect the
charger from the outlet. Lightning will cause damage to the device, and
a fire may also result.
If any heat, smoke, odor, or any abnormal sound emits from the
device, immediately turn the power off. Then disconnect the charger
and remove the battery.
Using the device when any of these conditions occur, may cause an
electrical shock or fire.
vi