Using The Screen Keyboard; Entering The Characters; Changing The Mode; Led Display - Fujitsu TeamPad PBT7500-16 Operation Manual

3.8 Using the Screen Keyboard

The screen keyboard is a full alphanumeric keyboard which can be accessed by pressing the [SYS]
and [DOWN ARROW].

3.8.1 Entering the characters

(1) Tap on a key on the screen keyboard.
Ø The character is entered.

3.8.2 Changing the mode

The screen keyboard has two modes, i.e., alphabetical lowercase character mode and alphabetical
uppercase character mode. The screen keyboard is displayed in alphabetical lowercase character
mode.
(1) Tap on the [CAP] key on the screen keyboard while the screen keyboard is being displayed.
Ø The alphabetical lowercase character mode and alphabetical uppercase character mode are
switched alternately each time the [CAP] key is tapped.

4 LED Display

The following explains the action to be taken when the LED is lit or flashes.

4.1 LED Displayed While in Operation

Take action according to the following "Response" if the LED blinks during operation:
LED display
Color
Red Flash (at an interval of
about 3 seconds)

4.2 LED Displayed When the Power Supply Is On

Take action according to the following "Response" if the LED is lit or flashes when the power
supply is turned on:
Display status
The battery voltage is below the specified
voltage.
Charge the battery, or replace the battery with
a spare battery.
However, the LED does not blink when this
unit is connected to the AC adapter, even if
the battery voltage is below the specified
voltage.
Response
37