Battery Charging - Fujitsu TeamPad PBT7500-16 Operation Manual

Teampad 7500 series
Table of Contents

Advertisement

1.3.2 Battery charging

The battery should be charged when a new battery is used, or when the residual battery capacity is
low.
The battery can be charged by using any of the following three methods:
Charging with the Charge Stand (PBT7531-01)
Direct charging the handheld with AC adapter (PBT7631-11)
Charging with the Battery Pack Charger (PBT7531-03)
NOTE
The plug of the AC adapter or battery pack charger
should not be pulled out of the plug socket until
charging has been completed.
The special charging adapter, AC adapter, and battery
pack charger must be used, otherwise this unit may be
damaged due to the difference in voltage or current
capacity.
This unit must be turned off before charging when the
charging adapter or AC adapter is used.
The optimum room temperature is 10
charging activities.
o
o
C to 30
C for
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Teampad pbt7510-16Teampad pbt7510-18

Table of Contents