Fujitsu TeamPad PBT7500-16 Operation Manual page 34

Ø
(4) Set the following settings on the 2
•
[Automatic Connection To Server] check box
This check box sets whether or not this unit is automatically connected to the server when this
unit is turned on.
NOTE
Don't uncheck this checked box, the user name, password, and the domain name must be
entered by pressing the Ten key when this unit is connected to the server.
>>Reference>> "3.1.1 Turning on the power supply "
Usually, you can check off [Automatic Connection To Server] this check box.
•
[Username] entry field
Enter this field when [Automatic Connection To Server] check box.
Enter the username to connect the server automatically.
[Password] entry field
Enter this field when [Automatic Connection To Server] check box.
Enter the password to connect the server automatically.
Enter the same password to entry the server in [Password] entry field.
When the [Password] entry field over flow at the server, an error has occurred at the end of
[WTS Connection Wizard]. At this time, enter the correct [Password] entry field.
[Domain] entry field
Enter this field when [Automatic Connection To Server] check box.
Enter the domain to connect the server automatically.
(5) Tap on the [Next] tab.
Ø Display the 3rd [WTS Connection Wizard] window.
nd
[WTS Connection Wizard] window.
21