Fujitsu TeamPad PBT7500-16 Operation Manual page 22

Charge with the Charger Stand
There are two methods of charging a TeamPad 7500 series thin client device with a charger stand.
The first is to charge one handheld with one charger stand, and the other is to charge two units
simultaneously with two charger stands. To charge a TeamPad 7500 series thin client device with a
charger stand, follow the steps below. Approximately 2.5 hours of charge time is required to fully
charge the handheld using a charger stand.
Charging one unit with one charger stand
This picture shows a TeamPad 7500 series sitting correctly in its charger stand. The charger
stand and AC adapter (PBT7531-02) are required for using this method.
(1) Turn this unit off.
(2) Connect the AC adapter to the AC adapter connection interface of the charging adapter.
(3) Verify the voltage levels correspond between the AC Adapter and your AC outlet. Insert the
plug of the AC adapter into the AC outlet.
9