Omron NX-AD series User Manual page 130

6 Analog Input Units
Eight-point Input Units
Setting name
Ch1 Enable/Disable
Ch2 Enable/Disable
Ch3 Enable/Disable
Ch4 Enable/Disable
Ch5 Enable/Disable
Ch6 Enable/Disable
Ch7 Enable/Disable
Ch8 Enable/Disable
Target NX Units
All Analog Input Units
Setting Method
This section describes how to configure settings with the Sysmac Studio.
When you are using Support Software other than the Sysmac Studio, in the Edit Unit Operation Set-
tings Tab Page, set the parameters described in the procedure and transfer the settings to the target
NX Unit.
For details on how to display the Edit Unit Operation Settings Tab Page and to transfer settings to an
NX Unit with Support Software other than the Sysmac Studio, refer to the operation manual for the Sup-
port Software that you are using.
1
Display the Edit Unit Operation Settings Tab Page.
For the display methods, refer to A-7 Displaying the Edit Unit Operation Settings Tab Page on
page A-61
2
Select True (Enable) or False (Disable) from the list of Input Enable/Disable Setting for which
the channel you want to set.
6 - 14
Description
Set to enable or disable the channel.
FALSE: Disable
TRUE: Enable
.
NX-series Analog I/O Units User's Manual for Analog Input Units and Analog Output Units (W522)
Default
Unit
value
TRUE ---
TRUE ---
TRUE ---
TRUE ---
TRUE ---
TRUE ---
TRUE ---
TRUE ---