Omron NX-AD series User Manual page 280

Appendices
NX Unit
Unit ver-
Model
sion
NX-AD2203 Ver. 1.0
NX-AD2204
NX-AD2208
NX-AD2603
NX-AD2604
NX-AD2608
NX-AD3203
NX-AD3204
NX-AD3208
NX-AD3603
NX-AD3604
NX-AD3608
NX-AD4203
NX-AD4204
NX-AD4208
NX-AD4603
NX-AD4604
NX-AD4608
NX-DA2203
NX-DA2205
NX-DA2603
NX-DA2605
NX-DA3203
NX-DA3205
NX-DA3603
NX-DA3605
*1. Refer to the user's manual for the EtherNet/IP Coupler Units for information on the unit versions of EtherNet/IP Units that
are compatible with EtherNet/IP Coupler Units.
*2. Refer to the user's manual for the EtherNet/IP Coupler Units for information on the unit versions of CPU Units and
EtherNet/IP Units that are compatible with EtherNet/IP Coupler Units.
*3. For connection to an EtherNet/IP Coupler Unit with unit version 1.0, connection is supported only for a connection to the
peripheral USB port on the EtherNet/IP Coupler Unit. You cannot connect by any other path. If you need to connect by
another path, use an EtherNet/IP Coupler Unit with unit version 1.2 or later.
A - 60
Application with an NJ/NX/NY-series Control-
*1
ler
EtherNet/IP CPU Unit or
Coupler Unit Industrial PC
Ver. 1.2 Ver. 1.14
NX-series Analog I/O Units User's Manual for Analog Input Units and Analog Output Units (W522)
Corresponding unit versions/versions
Application with a CS/CJ/CP-series PLC
Sysmac EtherNet/IP
Studio Coupler Unit
Ver. 1.19 Ver. 1.0
*2
NX-IO Config-
Sysmac
*3
Studio
urator
Ver. 1.10 Ver. 1.00