Table of Contents
Advertisement
13
SERVICE WORK ON THE CHASSIS
13.7
Removing the seat
13.8
Mounting the seat
2
0 0 2
1
0 0 1
–
Insert the ignition key in the seat lock
–
Raise the rear of the seat, pull the seat back, and lift it off.
–
Remove the ignition key.
F00651-10
–
Hook the catch
forward.
–
Insert the locking pin
the locking pin engages with an audible click.
–
Finally, check that the seat is correctly mounted.
401677-10
1
and turn it clockwise by 45°.
1
of the seat onto the fuel tank and lower the rear while pushing it
2
into the lock housing and push down the rear of the seat until
101
Advertisement
Table of Contents
