Changing The Turn Signal Bulb - KTM 1090 ADVENTURE 2017 Owner's Manual

16 ELECTRICAL SYSTEM
16.11

Changing the turn signal bulb

Note
Damage to reflector Grease on the reflector reduces the brightness.
Grease on the lamp will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
Finishing work
–
Install the headlight mask with the headlight. (
–
Install the wind shield. (
–
Install the mask spoiler.
–
Install the tank cover. (
–
Install the front side cover. (
–
Mount the seat. (
–
Check the headlight setting. (
–
Remove the screw on the front of the diffuser.
–
Carefully take off diffuser
–
Push bulb
of the socket.
Info
Do not touch the reflector with your fingers and keep it free from grease.
–
Lightly push the new lamp into the socket and turn all the way clockwise.
F00681-10
Turn signal (RY10W / socket BAU15s) (
p. 127)
( p. 118)
p. 125)
p. 114)
p. 101)
p. 174)
1
.
2
lightly into the socket, turn approx. 30° counterclockwise, and pull it out
p. 169)
p. 210)
173