KTM 1090 ADVENTURE 2017 Owner's Manual page 66

8 ERGONOMICS
–
Remove screws
one side.
Info
Cover the components to protect them against damage.
Do not bend the cables and lines.
–
Remove screws
–
Place the handlebar supports in the required position. Mount and tighten screws
308080-01
Guideline
Screw, handlebar support
Info
Position the left and right handlebar supports evenly.
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned correctly.
–
Position the handlebar clamps. Mount and evenly tighten screws
Guideline
Screw, handlebar clamp
Info
Make sure the gap widths are even.
1 . Remove the handlebar clamps. Remove the handlebar and lay it to
2
. Take off the handlebar supports.
M10 40 Nm Loctite
(29.5 lbf ft)
1
.
M8 20 Nm
(14.8 lbf ft)
64
2
.
® 243™