Toshiba TOSVERT-130G2+ Operation Manual page 89

TOSHIBA
8.7 Operating Functions - Descriptions and Examples (Cont'd)
The following example shows how to Start-Stop the unit remotely and have the
frequency set via the touch-pad. To do this, set the paramenters on 2nd function 9
as follows.
Key
The inverter must always be placed in the function mode before
MON
accessing any function.
When this key is pressed the inverter is placed into the second
2ND
function files.
When this key is pressed the inverter is placed into the second
9
function file number 9.
When this key is pressed the standard factory adjustment range
READ
setting of 7 is displayed.
When the keys 1 and WRT are pressed in order then the factory
1
adjustment range setting of 1 is written into memory replacing the
WRT
factory setting of 7.
When this key is pressed the second menu item under the 2nd 9
NEXT
functions is displayed.
When this key is pressed the standard factory adjustment range
READ
setting of 7 is displayed.
When the keys 2 and WRT are pressed in order then the factory
2
adjustment range setting of 2 is written into memory replacing the
factory setting of 7.
WRT
Returns the inverter to the original monitor mode.
MON
In order to run the inverter, simply enter the desired frequency followed by the WRT key.
The remote start/stop switch will be put between F (forward) or R (reverse) and CC
terminals on the terminal strip. Closing the connection will make the inverter run,
opening the connection will make the inverter decelerate to a stop at the programmed
deceleration time.
Action
8 - 30
Display