Toshiba TOSVERT-130G2+ Operation Manual page 37

TOSHIBA
5.10.2 Dynamic Braking (cont'd)
Note:
4) DB resistors should be installed as near to the inverter as possible with
temperature constraints in mind.
5)
CAUTION
extremely hot when used in conjunction with long duty cycles and high
inertia loads.
DANGER
6)
high DC bus voltage potential.
the charge or power LED lamp is on.
Consult factory for DBR sizing.
Exercise caution when working around
the DB resistors; they can become
PA-PB dynamic braking
resistor (DBR) terminals are at
Do not touch PA - PB terminals when
5 - 10