Rheem Solar Hiline 52D180 Owner's Manual And Installation Instructions page 41

Coupling Cold And Hot Pipes To Collector – Screwed Fittings
Refer to the exploded view diagrams
on page 41.
Seat an O'ring (11) into the collector connection.
1.
2. Place the end of the solar hot pipe into the collector connection and screw in the union until it seats firmly
against the O'ring (11), applying medium pressure with a spanner to tighten.
Repeat this procedure to couple the solar cold pipe to the solar collector.
3.
(Supplied)
P/No: 330171
on pages 30
Solar Cold Pipe
160L - 193372
300L - 193370
DETAIL A
SUNSTAT VALVE
O-Ring 25mm ID x 3.2 Thk
Solar Collector
Hot Pipe to Collector Assembly
CONNECTION TO COLLECTOR
Solar Cold Pipe
160L - 193372
300L - 193370
WATER CONNECTION TO COLLECTOR
Cold Pipe to Collector Assembly
Solar Hot Pipe
160L - 193371
300L - 193369
Sunstat valve
and 31 for position and
(Supplied)
P/No: 223904
P/No: 330171
DETAIL D
DETAIL F
SOLAR HOT PIPE
P/No: 330171
O-Ring 25mm ID x 3.2 Thk
(ITEMS WITH P/No's, ARE SUPPLIED
DETAIL B
DETAIL G
P/No: 330171
O-Ring 25mm ID x 3.2 Thk
41
SYSTEM ASSEMBLY
Detail F on page 41 and
Solar Cold Pipe
160L - 193372
300L - 193370
WATER CONNECTION TO CO
Solar Hot Pipe
160L - 193371
300L - 193369
DETAIL SHEET - FOR N
RHEEM DOMESTIC HIL
Solar Collector
P/No: 330606
Blanking Disc
P/No: 063602
Collector M33 End Plug
Detail G
DETAIL B
P/No: 330171
O-Ring 25mm ID x 3.2 T
Solar Collector
DETA
END P
O-Ri
Solar Collector
(BETW
Co
16
30