Rheem Solar Hiline 52D180 Owner's Manual And Installation Instructions page 40

SYSTEM ASSEMBLY
Coupling Collector To Collector – Screwed Fittings
Refer to the exploded view diagram
Seat an O'ring (11) into each of the collector connections to be joined.
1.
Fit a collector union (12) to each collector connection of the first solar collector to receive the second solar
2.
collector and screw in the unions until they seat firmly against their O'ring (11) in the collector connection.
Hand tighten only so the solar collectors can be shifted and centred.
3. Place the collector unions (12) into the collector connections on the second solar collector and screw in
the unions until they seat firmly against their O'ring (11) the collector connection. Hand tighten only so the
solar collectors can be shifted and centred.
After the solar collectors are centred on the collector angle, tighten each collector union (12) with a
4.
spanner applying medium pressure.
Solar Collector
End Plug Assembly – Screwed Fittings
Solar Cold Pipe
Refer to the exploded view diagrams
160L - 193372
300L - 193370
Seat an O'ring (11) into the collector connection.
1.
Place a blanking disc (22B) over the seated O'ring (11). The blanking disc (22B) should be installed with
2.
the smooth edge facing into the collector.
P/No: 330606
Blanking Disc
3. Place the end plug into the collector connection and screw in until it seats firmly against the blanking
disc (22B), applying medium pressure with a spanner to tighten.
P/No: 063602
Collector M33 End Plug
Solar Hot Pipe
160L - 193371
300L - 193369
on page 31 for position and
O-Ring 25mm ID x 3.2 Thk
Solar Collector
Collector Union Assembly
(BETWEEN COLLECTORS)
on pages 30
DETAIL B
WATER CONNECTION TO COLLECTOR
P/No: 330171
O-Ring 25mm ID x 3.2 Thk
COLLECTOR RAIL - BOTTOM
Solar Collector
Detail D
P/No: 330171
P/No: 330171
O-Ring 25mm ID x 3.2 Thk
P/No: 330695
Collector Union
DETAIL D
DETAIL C
CONNECTOR
and 31 for position and
Collector Strap
P/No: 191801
Collector Angle
160L - 191614
300L - 191613
P/No: 330606
Blanking Disc
DETAIL F
P/No: 063602 P/No: 063600
Gland Nut M33 End Plug
Collector M33 End Plug
DETAIL E
DETAIL E
End Plug Assembly
END PLUG
40
on page 40.
Solar Collector
Detail E on page 40.
Solar Collector
Solar Collector
Screw No. 8 x 19
P/No: 080022
P/No: 330171
O-Ring 25mm ID x 3
P/No: 330
Collector U
DETAI
CONNEC
(BETWEEN CO
Collector Angle
160L - 191614
300L - 191613
DE
COLLECTOR