Rheem Solar Hiline 52D180 Owner's Manual And Installation Instructions page 38

SYSTEM ASSEMBLY
ASSEMBLY DRAWINGS
Hooking Roof Strap to Collector Rail
1. Determine which slots in the collector rail (6) will be used for the roof straps (4) after locating the rafters
and taking note of the rafter spacing.
Note: The roof straps (4) are to be fitted to the collector rail (6) before fixing the straps to the rafters.
Rafter spacing
300 mm (12")
400 mm (16")
450 mm (18")
500 mm (20")
600 mm (24")
900 mm (36")
Noting the orientation of the roof strap's folded end, slide the long straight end of the roof strap (4) through
2.
the appropriate slot from the underside of the collector rail (6) (refer to
Pull the roof strap (4) through until the first bend in the strap slips into the slot in the collector rail (6). The
roof strap (4) will engage with the collector rail (6).
One collector
(1 x one collector rail)
1, 4 or 2, 3
1, 4
1, 4
1, 4
2, 3
1, 4
collector rail – one collector
collector rail – two collectors
DETAIL A
Bottom Collector Rail – Roof Strap Orientation
38
Recommended slots
Two collectors
(1 x two collector rail)
1, 6 or 2, 5
1, 5 or 2, 6
2, 5
1, 6 or 2, 5
1, 5 or 2, 6
2, 5
Detail A).