INSTALLINGTHEBUTTON-TYPEBATTERY
Button-type battery installation for the remote control
(VP-D382
/D382H/D385
( i )
1. Pull out the button-type battery holder toward the direction of
the arrow.
2. Position the button-type battery in the button-type battery holder,
with the positive (
3. Reinsert the button-type battery holder.
Precaution regarding the button-type battery
•
There is a danger of explosion if button-type battery is incorrectly replaced. Replace only with the same or
equivalent type.
•
Do not pick up the battery using tweezers or other metal tools. This will cause a short circuit.
•
Do not recharge, disassemble, heat or immerse the battery in water to avoid the risk of explosion.
Keepthebutton-typeBatteryoutofreachofchildren.Shouldabatterybeswallowed,seekmedical
attentionimmediately.
WARNING
only)
( i )
) terminal face up.
English _13