Installing The Button Type Battery - Samsung VP-DX10 User Manual

IINSTALLING THE BUTTON-TYPE BATTERY
Installing the button-type battery in the remote
control
1. Turn the battery holder counterclockwise (as
indicated with () mark) using your fi ngernail or a
coin to open it. The battery holder opens.
2. Insert the battery into the battery holder with the
positive (+) terminal facing down and press it fi rmly
until you hear a locking sound.
3. Place the battery holder back in the remote control,
matching its () mark with the () mark on the
remote control, and turn the battery holder clockwise
to lock it.
Precautions regarding the button type battery
• There is a danger of explosion if button type battery
is incorrectly replaced. Replace only with the same
or equivalent type.
• Do not pick up the battery using tweezers or other
metal tools. This will cause a short circuit.
• Do not recharge, disassemble, heat or immerse the
battery in water to avoid the risk of explosion.
Keep the button type battery out of the
reach of the children. Should any battery be
swallowed, consult a doctor immediately.
WARNING
15_ English
安装钮扣电池
1
2
Battery
holder
3
安装遥控器内的钮扣电池。
1. 用指甲或硬币向左转动电池舱盖(按照标识的标记
())。
2. 电池正面朝下(+)插入电池插槽并且轻轻按下直到
听到电池被锁住的声音。
3. 将电池安装在遥控器，将电池舱盖上的标记 ()
与遥控器上的标记 () 对齐，然后顺时针转动电
池舱盖将其锁住。
有关钮扣电池的安全防备措施
 如果更换错误的电池的类型会有爆炸的危险。仅可
使用同样或等效型的电池。
 不要用镊子或者其它金属工具取放电池。因为这样
做，会导致电池短路。
 不要击打，拆卸，加热或者将电池放在水中以免发
生爆炸。
将钮扣电池存放在孩子触及不到的地方。
万一吞下电池，请立刻咨询医生。
警告
中文 _15