basic recording
REVIEWINGANDSEARCHINGARECORDING
•
The Rec Search function works only in Camera mode. ➥page 18
•
Used to review previously recorded images or to find a point to record a new image in the STBY mode.
Record Search (Joystick)
1. Set the Select switch to TAPE. (VP-D385( i ) only)
2. Press the MODE button to set Camera (
3. To start recording, press the Recording start/stop button.
4. Set to STBY mode by pressing Recording start/stop button again.
5. To perform the backward search:
•
Move the Joystick () to the left.
- While you press and hold the Joystick (), the selected images will be played
in reverse order. Press and release the Joystick () to play the images in
reverse order for 3 seconds before resetting the play order to normal.
To perform the normal search:
•
Move the Joystick () to the right.
- While you press and hold the Joystick (), the selected images will be
played in normal order. To resume recording when your record search
is done, press the Recording start/stop button.
•
Mosaic shaped distortion may appear on the screen while in Record
Search mode.
•
Pressing Recording start/stop button after rec search will overwrite
the images recorded after that point.
40_ English
).
0:00:00
SP
16:9 Wide
60min
16BIt