digital still camera mode (VP-D385
taking a photo image (Jpeg) on the memory card
•
You may take photo images while in M.Cam mode and store the images on the
memory card.
page 18
➥
•
You can take photo images using the remote control.
1. Set the Select switch to CArD.
2. Press the MODE button to set Camera (
3. After framing your object to record, fully press the PHOTO button to take the picture.
•
The picture is taken and saved into the memory card within a few seconds.
•
Taking another picture within this interval is not possible.
•
A shutter sound is heard. When the "
image has been recorded.
•
Photo images are saved more widely than have been taken in LCD screen.
•
Photo images are saved in the memory card in an 800x600 format.
•
The number of photo images that can be stored depends on the quality
of the image.
•
Photo images (JPEG) can be stored in a memory card up to 20,000 files.
•
The photo images that you recorded are saved in JPEG file format on the
memory card.
•
In M.Cam or M.Player mode, the 16:9 wide mode is not supported.
The wide mode only displays in the aspect ratio of 4:3.
•
Audio will not be recorded with the photo image on the memory card.
•
Do not operate the POWEr switch or remove the memory card while
recording photo images. Doing so may damage the memory card.
78_ English
).
" indicator disappears, the photo
( i )
only)
MODE
CARD
TAPE
BATT.
REC
4536
SP
60min
16:9 Wide
10Sec
16BIt
S
No Tape !
1/50
M
29
W
T
C.Nite 1/30
12:00 1.JAN.2008