Table of Contents
Advertisement
1
Set the MENU ON/OFF/PAGE switch to ON.
The page that was on the screen when the last menu operation ended
appears on the viewfinder screen. (When this menu is first used, the
lowest-numbered one of the currently selected pages appears.)
2
Push the MENU ON/OFF/PAGE switch repeatedly to PAGE until
the SETUP CARD page shown below appears (or use the rotary
encoder).
E11*SETUP CARD
pREAD(pCAM)
WRITE(pCARD)
ID EDIT
WRITE PROTECT : OFF
WHITE DATA READ:
PRESS:READ CARD
If no card is inserted, the message "CARD NOT INSERTED!"
message appears. Close the menu and insert a card.
3
Push the MENU CANCEL/PRST/ITEM switch repeatedly to ITEM
until the cursor reaches the READ (
rotary encoder).
4
Press the rotary encoder.
A message asking whether or not data and the card ID of the camera
are to be read from the card appears.
OFF
SETUP CARD page (factory settings)
Chapter 4 Adjustments and Settings for Recording
Data read message
Data write message
Setting of card ID
CAM) position (or use the
4
4-121
Advertisement
Table of Contents
