Sony DVW-707/707P Operation Manual page 158

1
Set the MENU ON/OFF/PAGE switch to ON.
The page that was on the screen when the last menu operation ended
appears on the viewfinder screen. (When this menu is first used, the
lowest-numbered one of the currently selected pages appears.)
2
Push the MENU ON/OFF/PAGE switch repeatedly to PAGE until
the FUNCTION 2/2 page shown below appears (or use the rotary
encoder).
4
3
Push the MENU CANCEL/PRST/ITEM switch repeatedly to ITEM
until the cursor reaches the item whose setting you want to change
(or use the rotary encoder).
4
Press the rotary encoder, to display a question mark to the left of the
display.
5
Turn the rotary encoder to change the setting of the selected
function.
4-80
Chapter 4 Adjustments and Settings for Recording
?E13*FUNCTION 2/2 ?E13*FUNCTION 2/2
GENLOCK GENLOCK
CAM RET. CAM RET.
FILTER INT. FILTER INT.
FIELD/FRAME FIELD/FRAME
A.IRIS OVERRIDE: A.IRIS OVERRIDE:
DCCFUNCTION SEL: DCCFUNCTION SEL:
VTR MODE VTR MODE
RECINHIBIT(CCU): RECINHIBIT(CCU):
ASSIGNABLE SW ASSIGNABLE SW
FUNCTION 2/2 page (factory settings)
: : ON ON
: : OFF OFF
: : OFF OFF
: : FLD FLD
OFF OFF Function names
OFF OFF
: : OFF OFF
ON ON
: : OFF OFF