Table of Contents
Advertisement
Changing the display mode
The currently set display mode appears on the VF DISP page of the setup
menu. Follow the procedure below to change it.
1,4
2,3
1
Follow steps 1 to 3 in Section 4-8-2 "Selecting the Display Items"
(page 4-58), until the VF DISP 1/2 page of the setup menu is on the
viewfinder screen and the cursor is at DISP MODE.
2
Press the rotary encoder so that a question mark appears to the left of
the display mode indication, then turn the rotary encoder to change
the display mode selection.
3
When the setting is completed, press the rotary encoder.
The question mark to the left of the display mode indication
disappears.
4
To end the menu operation, set the MENU ON/OFF/PAGE switch to
OFF.
Changing the display mode
Chapter 4 Adjustments and Settings for Recording
1
4
4-63
Advertisement
Table of Contents
