Sony DVW-707/707P Operation Manual page 172

2
Push the MENU ON/OFF/PAGE switch repeatedly toward PAGE
(or press the rotary encoder) until the OFFSET WHT page (shown
below) appears.
4
3
Set the WHITE BAL switch to channel A or B.
Note
If the WHITE BAL switch is not set to A or B when you operate the
camcorder, the adjustment value will not be reflected in the output
signal.
4
Push the MENU CANCEL/PRST/ITEM switch repeatedly toward
ITEM (or turn the rotary encoder) until the cursor specifies the item
you want to change.
5
Turn the rotary encoder to change the setting of the selected
function, as follows.
OFFSET WHITE<A>: Turns the setting of the offset for channel A
ON or OFF.
WARM-COOL<A>: While looking at the image, adjust channel A
by turning the rotary encoder towards + (to produce a warm
image) or towards – (for a cool image).
FINE<A>: Adjusts the value more precisely if the adjustment by
WARM-COOL<A> is not satisfactory.
4-94
Chapter 4 Adjustments and Settings for Recording
E34*OFFSET WHT E34*OFFSET WHT
pOFFSET WHITE<A>:?
OFFSET WHITE<A>:?
WARM-COOL WARM-COOL <A>: <A>:
FINE FINE <A>: <A>:
OFFSET WHITE<B>: OFFSET WHITE<B>:
WARM-COOL WARM-COOL <B>: <B>:
FINE FINE <B>: <B>:
ON ON
0 0
0 0
OFF OFF
0 0
0 0