Baffle Removal - Quadra-Fire 21M-ACC-AU Owner's Manual

2100 Millennium AU Wood Appliance
D. Baffle Removal
1. Remove all ash from the firebox, and extinguish all hot
embers before disposal into a metal container.
2. The baffle board has 2 pieces. With the ceramic blanket
still in place, slide one baffle piece over the top of other
one and pull out top piece through the door opening and
then remove bottom baffle piece (Figure 20.1).
3. Remove the ceramic blanket.
4. Re-install the baffle pieces one piece at a time. Be sure
the baffle boards are even with the front manifold tube
and is resting on all tubes (Figure 20.3).
5. To re-install the ceramic blanket, it is easier to fold it
in half first. Place on top of baffle board, open up and
flatten and smooth out the blanket. Re-check the baffle
board for correct positioning (Figure 20.2).
Figure 20.1 - Baffle
Figure 20.2 - Ceramic Blanket
20
Baffle Board even with front
tube & resting on all tubes
Ceramic Blanket on Top
Tube Channels
Figure 20.3
7039-185A
Burn Rate
Air Control
Automatic
Combustion
Control
2 pc Baffle Board
16 August, 2018