Baffle Removal - Quadra-Fire 43M-ACC-NZ Owner's Manual

D. Baffle Removal
1. Remove all ash from the firebox, and extinguish all hot
embers before disposal into a metal container.
2. The baffle board has 2 pieces. With the ceramic blanket
still in place, slide one baffle piece over the top of other
one and pull out top piece through the door opening and
then remove bottom baffle piece (Figure 21.1).
3. Remove the ceramic blanket.
4. Re-install the baffle pieces one piece at a time. Be sure
the baffle boards are even with the front manifold tube
and is resting on all tubes (Figure 21.3).
5. To re-install the ceramic blanket, it is easier to fold it
in half first. Place on top of baffle board, open up and
flatten and smooth out the blanket. Re-check the baffle
board for correct positioning (Figure 21.2).
Figure 21.1 - Baffle
Figure 21.2 - Ceramic Blanket
21
Baffle Board even with front tube & resting
Figure 21.3
Ceramic Blanket on Top
Tube Channels
Figure 21.4
7037-182C
on all tubes
Air Control
2 pc Baffle Board
Burn Rate
Start-Up Air
Control
04/21