Samsung SCX-4x26 Series User Manual page 69

Multi functional printer
Hide thumbs Also See for SCX-4x26 Series:
Table of Contents

Advertisement

MESSAGE
MEANING
The memory is full.
Memory Full
The speed button or
Not Assigned
speed dial number
you tried to use has
no number assigned
to it.
The toner cartridge is
NonSAMSUNG
not a Samsung-
Toner
genuine cartridge.
Press OK to toggle
the message to Stop
or Continue.
Stop
Single page data
One Page is
exceeds the
Too Large
configured mail size.
You are in the Add
Operation Not
Page/Cancel Job
Assigned
operation, but there
are no jobs stored.
The output tray of the
Out-Bin Full|
machine is full of
Open/Close Door
paper.
Paper has jammed in
Paper Jam 0
the feeding area of the
Open/Close Door
tray.
Paper has jammed
Paper Jam 1
inside the machine.
Open/Close Door
Special print media
Paper Jam 2
has jammed in the
Check Inside
paper exit area.
The toner cartridge
Refilled Toner
you have installed is
not genuine or refilled.
SUGGESTED
SOLUTIONS
Delete unnecessary fax
jobs and retransmit after
more memory becomes
available. Alternatively,
split the transmission into
more than one operation.
Enter the number
manually using the
number keypad or store
the number or address.
You can select either Stop
or Continue with the left/
right arrow.
If you select Stop by
pressing OK on the control
panel, the machine stops
printing. If you select
Continue, the machine
keeps printing, but the
quality cannot be
guaranteed.
If you do not select any,
the machine will work as
Stop is selected.
Replace the
corresponding toner
cartridge with a Samsung-
genuine cartridge. See
page 61.
Reduce the resolution and
try again.
Check the display to see if
there are any scheduled
jobs.
Remove paper. Open the
front cover and than close
it.
Clear the jam. See page
65.
Clear the jam. See page
66.
Clear the jam. See page
66.
The print quality may get
poor if the refilled toner
cartridge is installed, since
its characteristics may
significantly differ from the
genuine.
We recommend Samsung-
genuine toner cartridge.
MESSAGE
MEANING
This message
Replace Toner
appears between
Toner Empty and
Toner Low status.
The life of the part
Replace
expires soon.
[xxx] Soon
The machine is
Retry Redial?
waiting for a specified
time interval to redial
a previously busy
station.
The scanner module
Scanner locked
is locked
There is a problem in
Send Error
SMTP authentication.
(AUTH)
There is a problem in
Send Error
DNS.
(DNS)
There is a problem in
Send Error
POP3.
(POP3)
There is a problem in
Send Error
SMTP.
(SMTP)
There is a problem on
Send Error
the network interface
(Wrong Config)
card.
A toner cartridge has
Toner Empty
almost reached its
estimated cartridge
life.
Samsung
does not
recommend
using non-
genuine Samsung
toner cartridge such
as refilled or
remanufactured.
Samsung cannot
guarantee non-
genuine Samsung
toner cartridge's
quality. Service or
repair required as a
result of using non-
genuine Samsung
toner cartridges will
not be covered under
the machine warranty.
SUGGESTED
SOLUTIONS
Replace the toner
cartridge with a new one.
See page 61.
See page 62 and call for
service.
You can press OK to
immediately redial, or
Stop/Clear to cancel the
redial operation.
Unlock the scanner and
press Stop/Clear.
Configure the
authentication setting.
Configure the DNS setting.
Configure the POP3
setting.
Change to the available
server.
Configure your network
interface card correctly.
You can choose either
Stop or Continue as
shown on the control
panel. If you select Stop,
the printer stops printing
and you cannot print any
more without changing the
cartrdige. If you select
Continue, the printer
keeps printing but the
printing quality cannot be
guaranteed.
Replace the toner
cartridge for the best print
quality when this message
appears. Using a cartridge
beyond this stage can
result in printing quality
issues. (See page 61.)
Troubleshooting_ 69

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scx-4826fn

Table of Contents